As you may have already heard, the company Battery Condition Test B.V. has closed on 1 September 2019.
The brand Battery Condition Test, the website and the activities will be taken over by a new party. This party will take care of the availability of testers and cables and provide the corresponding support.
In the transition period to the new party, it is possible to make use of support via the website (Link to Your Support). Through this website we will keep you informed of progress and news about the new party.
Thank you for your understanding and the temporary inconvenience.
Benefits
- E-Bikes Battery tester, Tests 2 batteries and chargers* at the same time
- Easy automatic testing of the battery capacity (Ah and Wh)
- Determine accurate Remaining Capacity for service and trade-in
- Printed (PDF) report with charge & discharge curves
- Simulates both acceleration and constant driving
- Connection kit for most batteries included
Testing a Battery
- No more cycling for hours
- Test from 7.2, 12, 24, 36, 48, 60 and 72 Volt batteries, e-bikes, scooter and motor-bikes
- Fully automatic charge – test/discharge – recharge cycle test*
- Check a battery on Motor Peak power (street conditions)
- Compatible battery list
Select a model
The specified file on Include Me shortcode does not exist.
Unpacking the Battery Analyzer
This shows what will be inside your shipment
Test a battery: Step by Step instructions
An example of a full test of a battery.
Introduction to Battery Testing
An introduction to Battery Condition testing for E-Bike and scooter applications.
Battery Condition Test Software demonstration
This is a walk-through of the software, to show the possibilities and also to instruct where certain features can be found.
New products
-
Adapter cable Bosch Classic / Active / Performance batteries (Set)
€ 100.00 -
Adapter cable for Metco 24V (Cortina/Bikkel)
€ 50.00 -
Adapter cable for Protanium/Portapower batteries
€ 50.00 -
Adapter cable TranzX for BL03 and BL07/BL15 batteries (SET)
€ 60.00 -
Adapter cable for Gazelle Panasonic batteries
€ 50.00 -
Adapter cable for Phylion JCEB360 batteries
€ 60.00 -
Adapter cable for Gazelle Innergy batteries
€ 50.00
Compatibility
All batteries that have + and – voltage on their terminals can be tested. Below is a list with validated popular types |
Brand | Battery | Volt | Wh / Ah | Remark | |
Batavus | Monaco E-go | 36V | 317Wh |
|
|
Batavus | E-Motion E-300 | 36V | 317Wh |
|
|
Bikkel | Metco | 24V | 365Wh |
|
|
Bosch | Classic | 36V | 400Wh |
|
|
Bosch | Active | 36V | 400-500Wh |
|
|
Bosch | Performance | 36V | 400-500Wh |
|
|
Cortina | Kruidbosch | 24V | 365Wh |
|
|
ContiTech / Continental | CONTI E-Bike systems | 36V | 405Wh / 512Wh |
|
|
Derby | Impulse | 36V | 396-612Wh |
|
|
Kalkhof | Impulse | 36V | 396-612Wh |
|
|
Flyer | Panasonic | 26V |
|
||
Flyer | Panasonic | 36V |
|
||
Gazelle | Innergy | 36V | 252-504Wh |
|
|
Easyglider | Panasonic | 26V |
|
||
Giant Twist 26V | 26V | 234Wh |
|
||
Giant Twist Go | 36V | 288Wh |
|
||
E+ | Yamaha | 36V | 409Wh |
|
|
Koga | E-Motion E-300 | 36V | 317Wh |
|
|
Kreidler | Sinus+ (back seat) | 36V | 360Wh |
|
|
Kreidler | Sinus+ (mid) | 36V | 360Wh |
|
|
Multicycle | Multicycle | All | All |
|
|
Protanium | Portapower | 36V | 10.4Ah |
|
|
Protanium | Yoku | 36V | 9Ah |
|
|
QWIC | All blade types | 36V | 400-700Wh |
|
Check for newest with QWIC directly |
Stella | Phylion | 36V | All |
|
|
Sparta | E-Motion C1 | 26V | 260Wh |
|
|
Sparta | E-Motion C2 ~ C5 | 36V | 317Wh ~ 500Wh |
|
|
Sparta | M7e, M8e, F8e | 36V | 317Wh |
|
|
Sparta | E-Motion C3 | 36V | 396Wh |
|
|
Sparta | E-Motion E-300 | 36V | 317Wh |
|
|
TranzX | BL03 | 24V |
|
||
TranzX | BL03 | 36V |
|
||
TranzX | BL07 | 36V |
|
||
TranzX | BL15 | 36V |
|
||
Union | Portapower | 36V |
|
||
Yamaha | PW-system | 36V | 497Wh |
|
* Special cable is required and must be ordered separately. |
** Works with the standard cable, but for BMS readout, a special cable is required. |
*** Works with the standard cable, but a cable with a proper connector is available. |